Contract Source Code (Solidity)

IDE

• Blockscan IDE

More Options

• Similar
• Submit Audit
• Compare

/**
 *Submitted for verification at Sepolia.Arbiscan.io on 2024-01-16
*/

// Sources flattened with hardhat v2.18.2 https://hardhat.org

// SPDX-License-Identifier: MIT

// File @openzeppelin/contracts/utils/introspection/[email protected]

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}


// File @openzeppelin/contracts/token/ERC721/[email protected]

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC721/IERC721.sol)

pragma solidity ^0.8.0;

/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must have been allowed to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId) external;

    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721
     * or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must
     * understand this adds an external call which potentially creates a reentrancy vulnerability.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 tokenId) external;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool approved) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);
}


// File @openzeppelin/contracts/token/ERC721/extensions/[email protected]

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)

pragma solidity ^0.8.0;

/**
 * @title ERC-721 Non-Fungible Token Standard, optional metadata extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Metadata is IERC721 {
    /**
     * @dev Returns the token collection name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) external view returns (string memory);
}


// File @openzeppelin/contracts/token/ERC721/[email protected]

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721Receiver.sol)

pragma solidity ^0.8.0;

/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
     *
     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}


// File @openzeppelin/contracts/utils/[email protected]

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     *
     * Furthermore, `isContract` will also return true if the target contract within
     * the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
     * which only has an effect at the end of a transaction.
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}


// File @openzeppelin/contracts/utils/[email protected]

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}


// File @openzeppelin/contracts/utils/introspection/[email protected]

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}


// File @openzeppelin/contracts/utils/math/[email protected]

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1, "Math: mulDiv overflow");

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.

            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (rounding == Rounding.Up && 10 ** result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256, rounded down, of a positive value.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (rounding == Rounding.Up && 1 << (result << 3) < value ? 1 : 0);
        }
    }
}


// File @openzeppelin/contracts/utils/math/[email protected]

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/SignedMath.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard signed math utilities missing in the Solidity language.
 */
library SignedMath {
    /**
     * @dev Returns the largest of two signed numbers.
     */
    function max(int256 a, int256 b) internal pure returns (int256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two signed numbers.
     */
    function min(int256 a, int256 b) internal pure returns (int256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two signed numbers without overflow.
     * The result is rounded towards zero.
     */
    function average(int256 a, int256 b) internal pure returns (int256) {
        // Formula from the book "Hacker's Delight"
        int256 x = (a & b) + ((a ^ b) >> 1);
        return x + (int256(uint256(x) >> 255) & (a ^ b));
    }

    /**
     * @dev Returns the absolute unsigned value of a signed value.
     */
    function abs(int256 n) internal pure returns (uint256) {
        unchecked {
            // must be unchecked in order to support `n = type(int256).min`
            return uint256(n >= 0 ? n : -n);
        }
    }
}


// File @openzeppelin/contracts/utils/[email protected]

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Strings.sol)

pragma solidity ^0.8.0;


/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _SYMBOLS = "0123456789abcdef";
    uint8 private constant _ADDRESS_LENGTH = 20;

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), _SYMBOLS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `int256` to its ASCII `string` decimal representation.
     */
    function toString(int256 value) internal pure returns (string memory) {
        return string(abi.encodePacked(value < 0 ? "-" : "", toString(SignedMath.abs(value))));
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
    }

    /**
     * @dev Returns true if the two strings are equal.
     */
    function equal(string memory a, string memory b) internal pure returns (bool) {
        return keccak256(bytes(a)) == keccak256(bytes(b));
    }
}


// File @openzeppelin/contracts/token/ERC721/[email protected]

// Original license: SPDX_License_Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC721/ERC721.sol)

pragma solidity ^0.8.0;







/**
 * @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
 * the Metadata extension, but not including the Enumerable extension, which is available separately as
 * {ERC721Enumerable}.
 */
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
    using Address for address;
    using Strings for uint256;

    // Token name
    string private _name;

    // Token symbol
    string private _symbol;

    // Mapping from token ID to owner address
    mapping(uint256 => address) private _owners;

    // Mapping owner address to token count
    mapping(address => uint256) private _balances;

    // Mapping from token ID to approved address
    mapping(uint256 => address) private _tokenApprovals;

    // Mapping from owner to operator approvals
    mapping(address => mapping(address => bool)) private _operatorApprovals;

    /**
     * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
        return
            interfaceId == type(IERC721).interfaceId ||
            interfaceId == type(IERC721Metadata).interfaceId ||
            super.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IERC721-balanceOf}.
     */
    function balanceOf(address owner) public view virtual override returns (uint256) {
        require(owner != address(0), "ERC721: address zero is not a valid owner");
        return _balances[owner];
    }

    /**
     * @dev See {IERC721-ownerOf}.
     */
    function ownerOf(uint256 tokenId) public view virtual override returns (address) {
        address owner = _ownerOf(tokenId);
        require(owner != address(0), "ERC721: invalid token ID");
        return owner;
    }

    /**
     * @dev See {IERC721Metadata-name}.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev See {IERC721Metadata-symbol}.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev See {IERC721Metadata-tokenURI}.
     */
    function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
        _requireMinted(tokenId);

        string memory baseURI = _baseURI();
        return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
    }

    /**
     * @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
     * token will be the concatenation of the `baseURI` and the `tokenId`. Empty
     * by default, can be overridden in child contracts.
     */
    function _baseURI() internal view virtual returns (string memory) {
        return "";
    }

    /**
     * @dev See {IERC721-approve}.
     */
    function approve(address to, uint256 tokenId) public virtual override {
        address owner = ERC721.ownerOf(tokenId);
        require(to != owner, "ERC721: approval to current owner");

        require(
            _msgSender() == owner || isApprovedForAll(owner, _msgSender()),
            "ERC721: approve caller is not token owner or approved for all"
        );

        _approve(to, tokenId);
    }

    /**
     * @dev See {IERC721-getApproved}.
     */
    function getApproved(uint256 tokenId) public view virtual override returns (address) {
        _requireMinted(tokenId);

        return _tokenApprovals[tokenId];
    }

    /**
     * @dev See {IERC721-setApprovalForAll}.
     */
    function setApprovalForAll(address operator, bool approved) public virtual override {
        _setApprovalForAll(_msgSender(), operator, approved);
    }

    /**
     * @dev See {IERC721-isApprovedForAll}.
     */
    function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
        return _operatorApprovals[owner][operator];
    }

    /**
     * @dev See {IERC721-transferFrom}.
     */
    function transferFrom(address from, address to, uint256 tokenId) public virtual override {
        //solhint-disable-next-line max-line-length
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: caller is not token owner or approved");

        _transfer(from, to, tokenId);
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId) public virtual override {
        safeTransferFrom(from, to, tokenId, "");
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory data) public virtual override {
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: caller is not token owner or approved");
        _safeTransfer(from, to, tokenId, data);
    }

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * `data` is additional data, it has no specified format and it is sent in call to `to`.
     *
     * This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
     * implement alternative mechanisms to perform token transfer, such as signature-based.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeTransfer(address from, address to, uint256 tokenId, bytes memory data) internal virtual {
        _transfer(from, to, tokenId);
        require(_checkOnERC721Received(from, to, tokenId, data), "ERC721: transfer to non ERC721Receiver implementer");
    }

    /**
     * @dev Returns the owner of the `tokenId`. Does NOT revert if token doesn't exist
     */
    function _ownerOf(uint256 tokenId) internal view virtual returns (address) {
        return _owners[tokenId];
    }

    /**
     * @dev Returns whether `tokenId` exists.
     *
     * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
     *
     * Tokens start existing when they are minted (`_mint`),
     * and stop existing when they are burned (`_burn`).
     */
    function _exists(uint256 tokenId) internal view virtual returns (bool) {
        return _ownerOf(tokenId) != address(0);
    }

    /**
     * @dev Returns whether `spender` is allowed to manage `tokenId`.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
        address owner = ERC721.ownerOf(tokenId);
        return (spender == owner || isApprovedForAll(owner, spender) || getApproved(tokenId) == spender);
    }

    /**
     * @dev Safely mints `tokenId` and transfers it to `to`.
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeMint(address to, uint256 tokenId) internal virtual {
        _safeMint(to, tokenId, "");
    }

    /**
     * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
     */
    function _safeMint(address to, uint256 tokenId, bytes memory data) internal virtual {
        _mint(to, tokenId);
        require(
            _checkOnERC721Received(address(0), to, tokenId, data),
            "ERC721: transfer to non ERC721Receiver implementer"
        );
    }

    /**
     * @dev Mints `tokenId` and transfers it to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - `to` cannot be the zero address.
     *
     * Emits a {Transfer} event.
     */
    function _mint(address to, uint256 tokenId) internal virtual {
        require(to != address(0), "ERC721: mint to the zero address");
        require(!_exists(tokenId), "ERC721: token already minted");

        _beforeTokenTransfer(address(0), to, tokenId, 1);

        // Check that tokenId was not minted by `_beforeTokenTransfer` hook
        require(!_exists(tokenId), "ERC721: token already minted");

        unchecked {
            // Will not overflow unless all 2**256 token ids are minted to the same owner.
            // Given that tokens are minted one by one, it is impossible in practice that
            // this ever happens. Might change if we allow batch minting.
            // The ERC fails to describe this case.
            _balances[to] += 1;
        }

        _owners[tokenId] = to;

        emit Transfer(address(0), to, tokenId);

        _afterTokenTransfer(address(0), to, tokenId, 1);
    }

    /**
     * @dev Destroys `tokenId`.
     * The approval is cleared when the token is burned.
     * This is an internal function that does not check if the sender is authorized to operate on the token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     *
     * Emits a {Transfer} event.
     */
    function _burn(uint256 tokenId) internal virtual {
        address owner = ERC721.ownerOf(tokenId);

        _beforeTokenTransfer(owner, address(0), tokenId, 1);

        // Update ownership in case tokenId was transferred by `_beforeTokenTransfer` hook
        owner = ERC721.ownerOf(tokenId);

        // Clear approvals
        delete _tokenApprovals[tokenId];

        unchecked {
            // Cannot overflow, as that would require more tokens to be burned/transferred
            // out than the owner initially received through minting and transferring in.
            _balances[owner] -= 1;
        }
        delete _owners[tokenId];

        emit Transfer(owner, address(0), tokenId);

        _afterTokenTransfer(owner, address(0), tokenId, 1);
    }

    /**
     * @dev Transfers `tokenId` from `from` to `to`.
     *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     *
     * Emits a {Transfer} event.
     */
    function _transfer(address from, address to, uint256 tokenId) internal virtual {
        require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner");
        require(to != address(0), "ERC721: transfer to the zero address");

        _beforeTokenTransfer(from, to, tokenId, 1);

        // Check that tokenId was not transferred by `_beforeTokenTransfer` hook
        require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner");

        // Clear approvals from the previous owner
        delete _tokenApprovals[tokenId];

        unchecked {
            // `_balances[from]` cannot overflow for the same reason as described in `_burn`:
            // `from`'s balance is the number of token held, which is at least one before the current
            // transfer.
            // `_balances[to]` could overflow in the conditions described in `_mint`. That would require
            // all 2**256 token ids to be minted, which in practice is impossible.
            _balances[from] -= 1;
            _balances[to] += 1;
        }
        _owners[tokenId] = to;

        emit Transfer(from, to, tokenId);

        _afterTokenTransfer(from, to, tokenId, 1);
    }

    /**
     * @dev Approve `to` to operate on `tokenId`
     *
     * Emits an {Approval} event.
     */
    function _approve(address to, uint256 tokenId) internal virtual {
        _tokenApprovals[tokenId] = to;
        emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
    }

    /**
     * @dev Approve `operator` to operate on all of `owner` tokens
     *
     * Emits an {ApprovalForAll} event.
     */
    function _setApprovalForAll(address owner, address operator, bool approved) internal virtual {
        require(owner != operator, "ERC721: approve to caller");
        _operatorApprovals[owner][operator] = approved;
        emit ApprovalForAll(owner, operator, approved);
    }

    /**
     * @dev Reverts if the `tokenId` has not been minted yet.
     */
    function _requireMinted(uint256 tokenId) internal view virtual {
        require(_exists(tokenId), "ERC721: invalid token ID");
    }

    /**
     * @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
     * The call is not executed if the target address is not a contract.
     *
     * @param from address representing the previous owner of the given token ID
     * @param to target address that will receive the tokens
     * @param tokenId uint256 ID of the token to be transferred
     * @param data bytes optional data to send along with the call
     * @return bool whether the call correctly returned the expected magic value
     */
    function _checkOnERC721Received(
        address from,
        address to,
        uint256 tokenId,
        bytes memory data
    ) private returns (bool) {
        if (to.isContract()) {
            try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {
                return retval == IERC721Receiver.onERC721Received.selector;
            } catch (bytes memory reason) {
                if (reason.length == 0) {
                    revert("ERC721: transfer to non ERC721Receiver implementer");
                } else {
                    /// @solidity memory-safe-assembly
                    assembly {
                        revert(add(32, reason), mload(reason))
                    }
                }
            }
        } else {
            return true;
        }
    }

    /**
     * @dev Hook that is called before any token transfer. This includes minting and burning. If {ERC721Consecutive} is
     * used, the hook may be called as part of a consecutive (batch) mint, as indicated by `batchSize` greater than 1.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, ``from``'s tokens will be transferred to `to`.
     * - When `from` is zero, the tokens will be minted for `to`.
     * - When `to` is zero, ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     * - `batchSize` is non-zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 firstTokenId, uint256 batchSize) internal virtual {}

    /**
     * @dev Hook that is called after any token transfer. This includes minting and burning. If {ERC721Consecutive} is
     * used, the hook may be called as part of a consecutive (batch) mint, as indicated by `batchSize` greater than 1.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, ``from``'s tokens were transferred to `to`.
     * - When `from` is zero, the tokens were minted for `to`.
     * - When `to` is zero, ``from``'s tokens were burned.
     * - `from` and `to` are never both zero.
     * - `batchSize` is non-zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(address from, address to, uint256 firstTokenId, uint256 batchSize) internal virtual {}

    /**
     * @dev Unsafe write access to the balances, used by extensions that "mint" tokens using an {ownerOf} override.
     *
     * WARNING: Anyone calling this MUST ensure that the balances remain consistent with the ownership. The invariant
     * being that for any address `a` the value returned by `balanceOf(a)` must be equal to the number of tokens such
     * that `ownerOf(tokenId)` is `a`.
     */
    // solhint-disable-next-line func-name-mixedcase
    function __unsafe_increaseBalance(address account, uint256 amount) internal {
        _balances[account] += amount;
    }
}


// File contracts/TestERC721.sol

// Original license: SPDX_License_Identifier: MIT
pragma solidity ^0.8.0;

contract TestERC721 is ERC721 {
    constructor() ERC721("TestERC721", "TEST") {}

    function mint(address to, uint256 tokenId) external {
        _mint(to, tokenId);
    }

    function sign(address owner, uint256 a) external view {}
}

[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"approved","type":"address"},{"indexed":true,"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"operator","type":"address"},{"indexed":false,"internalType":"bool","name":"approved","type":"bool"}],"name":"ApprovalForAll","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":true,"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"Transfer","type":"event"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"approve","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"getApproved","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"operator","type":"address"}],"name":"isApprovedForAll","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"mint","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"ownerOf","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"safeTransferFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"},{"internalType":"bytes","name":"data","type":"bytes"}],"name":"safeTransferFrom","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"operator","type":"address"},{"internalType":"bool","name":"approved","type":"bool"}],"name":"setApprovalForAll","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"uint256","name":"a","type":"uint256"}],"name":"sign","outputs":[],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes4","name":"interfaceId","type":"bytes4"}],"name":"supportsInterface","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"tokenURI","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"tokenId","type":"uint256"}],"name":"transferFrom","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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

54744:246:0:-:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;38775:305;;;;;;:::i;:::-;;:::i;:::-;;;565:14:1;;558:22;540:41;;528:2;513:18;38775:305:0;;;;;;;;39703:100;;;:::i;:::-;;;;;;;:::i;41215:171::-;;;;;;:::i;:::-;;:::i;:::-;;;-1:-1:-1;;;;;1697:32:1;;;1679:51;;1667:2;1652:18;41215:171:0;1533:203:1;40733:416:0;;;;;;:::i;:::-;;:::i;:::-;;41915:301;;;;;;:::i;:::-;;:::i;54834:89::-;;;;;;:::i;:::-;;:::i;42287:151::-;;;;;;:::i;:::-;;:::i;54931:56::-;;;;;;:::i;:::-;54834:89;;;39413:223;;;;;;:::i;:::-;;:::i;39144:207::-;;;;;;:::i;:::-;;:::i;:::-;;;2848:25:1;;;2836:2;2821:18;39144:207:0;2702:177:1;39872:104:0;;;:::i;41458:155::-;;;;;;:::i;:::-;;:::i;42509:279::-;;;;;;:::i;:::-;;:::i;40047:281::-;;;;;;:::i;:::-;;:::i;41684:164::-;;;;;;:::i;:::-;-1:-1:-1;;;;;41805:25:0;;;41781:4;41805:25;;;:18;:25;;;;;;;;:35;;;;;;;;;;;;;;;41684:164;38775:305;38877:4;-1:-1:-1;;;;;;38914:40:0;;-1:-1:-1;;;38914:40:0;;:105;;-1:-1:-1;;;;;;;38971:48:0;;-1:-1:-1;;;38971:48:0;38914:105;:158;;;-1:-1:-1;;;;;;;;;;19767:40:0;;;39036:36;38894:178;38775:305;-1:-1:-1;;38775:305:0:o;39703:100::-;39757:13;39790:5;39783:12;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;39703:100;:::o;41215:171::-;41291:7;41311:23;41326:7;41311:14;:23::i;:::-;-1:-1:-1;41354:24:0;;;;:15;:24;;;;;;-1:-1:-1;;;;;41354:24:0;;41215:171::o;40733:416::-;40814:13;40830:23;40845:7;40830:14;:23::i;:::-;40814:39;;40878:5;-1:-1:-1;;;;;40872:11:0;:2;-1:-1:-1;;;;;40872:11:0;;40864:57;;;;-1:-1:-1;;;40864:57:0;;5363:2:1;40864:57:0;;;5345:21:1;5402:2;5382:18;;;5375:30;5441:34;5421:18;;;5414:62;-1:-1:-1;;;5492:18:1;;;5485:31;5533:19;;40864:57:0;;;;;;;;;18604:10;-1:-1:-1;;;;;40956:21:0;;;;:62;;-1:-1:-1;40981:37:0;40998:5;18604:10;41684:164;:::i;40981:37::-;40934:173;;;;-1:-1:-1;;;40934:173:0;;5765:2:1;40934:173:0;;;5747:21:1;5804:2;5784:18;;;5777:30;5843:34;5823:18;;;5816:62;5914:31;5894:18;;;5887:59;5963:19;;40934:173:0;5563:425:1;40934:173:0;41120:21;41129:2;41133:7;41120:8;:21::i;:::-;40803:346;40733:416;;:::o;41915:301::-;42076:41;18604:10;42109:7;42076:18;:41::i;:::-;42068:99;;;;-1:-1:-1;;;42068:99:0;;;;;;;:::i;:::-;42180:28;42190:4;42196:2;42200:7;42180:9;:28::i;54834:89::-;54897:18;54903:2;54907:7;54897:5;:18::i;42287:151::-;42391:39;42408:4;42414:2;42418:7;42391:39;;;;;;;;;;;;:16;:39::i;39413:223::-;39485:7;44146:16;;;:7;:16;;;;;;-1:-1:-1;;;;;44146:16:0;;39549:56;;;;-1:-1:-1;;;39549:56:0;;6609:2:1;39549:56:0;;;6591:21:1;6648:2;6628:18;;;6621:30;-1:-1:-1;;;6667:18:1;;;6660:54;6731:18;;39549:56:0;6407:348:1;39144:207:0;39216:7;-1:-1:-1;;;;;39244:19:0;;39236:73;;;;-1:-1:-1;;;39236:73:0;;6962:2:1;39236:73:0;;;6944:21:1;7001:2;6981:18;;;6974:30;7040:34;7020:18;;;7013:62;-1:-1:-1;;;7091:18:1;;;7084:39;7140:19;;39236:73:0;6760:405:1;39236:73:0;-1:-1:-1;;;;;;39327:16:0;;;;;:9;:16;;;;;;;39144:207::o;39872:104::-;39928:13;39961:7;39954:14;;;;;:::i;41458:155::-;41553:52;18604:10;41586:8;41596;41553:18;:52::i;42509:279::-;42640:41;18604:10;42673:7;42640:18;:41::i;:::-;42632:99;;;;-1:-1:-1;;;42632:99:0;;;;;;;:::i;:::-;42742:38;42756:4;42762:2;42766:7;42775:4;42742:13;:38::i;:::-;42509:279;;;;:::o;40047:281::-;40120:13;40146:23;40161:7;40146:14;:23::i;:::-;40182:21;40206:10;40654:9;;;;;;;;;-1:-1:-1;40654:9:0;;;40577:94;40206:10;40182:34;;40258:1;40240:7;40234:21;:25;:86;;;;;;;;;;;;;;;;;40286:7;40295:18;:7;:16;:18::i;:::-;40269:45;;;;;;;;;:::i;:::-;;;;;;;;;;;;;40234:86;40227:93;40047:281;-1:-1:-1;;;40047:281:0:o;50778:135::-;44548:4;44146:16;;;:7;:16;;;;;;-1:-1:-1;;;;;44146:16:0;50852:53;;;;-1:-1:-1;;;50852:53:0;;6609:2:1;50852:53:0;;;6591:21:1;6648:2;6628:18;;;6621:30;-1:-1:-1;;;6667:18:1;;;6660:54;6731:18;;50852:53:0;6407:348:1;50852:53:0;50778:135;:::o;50091:174::-;50166:24;;;;:15;:24;;;;;:29;;-1:-1:-1;;;;;;50166:29:0;-1:-1:-1;;;;;50166:29:0;;;;;;;;:24;;50220:23;50166:24;50220:14;:23::i;:::-;-1:-1:-1;;;;;50211:46:0;;;;;;;;;;;50091:174;;:::o;44778:264::-;44871:4;44888:13;44904:23;44919:7;44904:14;:23::i;:::-;44888:39;;44957:5;-1:-1:-1;;;;;44946:16:0;:7;-1:-1:-1;;;;;44946:16:0;;:52;;;-1:-1:-1;;;;;;41805:25:0;;;41781:4;41805:25;;;:18;:25;;;;;;;;:35;;;;;;;;;;;;44966:32;44946:87;;;;45026:7;-1:-1:-1;;;;;45002:31:0;:20;45014:7;45002:11;:20::i;:::-;-1:-1:-1;;;;;45002:31:0;;44946:87;44938:96;44778:264;-1:-1:-1;;;;44778:264:0:o;48743:1229::-;48868:4;-1:-1:-1;;;;;48841:31:0;:23;48856:7;48841:14;:23::i;:::-;-1:-1:-1;;;;;48841:31:0;;48833:81;;;;-1:-1:-1;;;48833:81:0;;;;;;;:::i;:::-;-1:-1:-1;;;;;48933:16:0;;48925:65;;;;-1:-1:-1;;;48925:65:0;;8279:2:1;48925:65:0;;;8261:21:1;8318:2;8298:18;;;8291:30;8357:34;8337:18;;;8330:62;-1:-1:-1;;;8408:18:1;;;8401:34;8452:19;;48925:65:0;8077:400:1;48925:65:0;49175:4;-1:-1:-1;;;;;49148:31:0;:23;49163:7;49148:14;:23::i;:::-;-1:-1:-1;;;;;49148:31:0;;49140:81;;;;-1:-1:-1;;;49140:81:0;;;;;;;:::i;:::-;49293:24;;;;:15;:24;;;;;;;;49286:31;;-1:-1:-1;;;;;;49286:31:0;;;;;;-1:-1:-1;;;;;49769:15:0;;;;;;:9;:15;;;;;:20;;-1:-1:-1;;49769:20:0;;;49804:13;;;;;;;;;:18;;49286:31;49804:18;;;49844:16;;;:7;:16;;;;;;:21;;;;;;;;;;49883:27;;49309:7;;49883:27;;;40803:346;40733:416;;:::o;46342:942::-;-1:-1:-1;;;;;46422:16:0;;46414:61;;;;-1:-1:-1;;;46414:61:0;;8684:2:1;46414:61:0;;;8666:21:1;;;8703:18;;;8696:30;8762:34;8742:18;;;8735:62;8814:18;;46414:61:0;8482:356:1;46414:61:0;44548:4;44146:16;;;:7;:16;;;;;;-1:-1:-1;;;;;44146:16:0;44572:31;46486:58;;;;-1:-1:-1;;;46486:58:0;;9045:2:1;46486:58:0;;;9027:21:1;9084:2;9064:18;;;9057:30;9123;9103:18;;;9096:58;9171:18;;46486:58:0;8843:352:1;46486:58:0;44548:4;44146:16;;;:7;:16;;;;;;-1:-1:-1;;;;;44146:16:0;44572:31;46695:58;;;;-1:-1:-1;;;46695:58:0;;9045:2:1;46695:58:0;;;9027:21:1;9084:2;9064:18;;;9057:30;9123;9103:18;;;9096:58;9171:18;;46695:58:0;8843:352:1;46695:58:0;-1:-1:-1;;;;;47102:13:0;;;;;;:9;:13;;;;;;;;:18;;47119:1;47102:18;;;47144:16;;;:7;:16;;;;;;:21;;-1:-1:-1;;;;;;47144:21:0;;;;;47183:33;47152:7;;47102:13;;47183:33;;47102:13;;47183:33;54834:89;;;50408:281;50529:8;-1:-1:-1;;;;;50520:17:0;:5;-1:-1:-1;;;;;50520:17:0;;50512:55;;;;-1:-1:-1;;;50512:55:0;;9402:2:1;50512:55:0;;;9384:21:1;9441:2;9421:18;;;9414:30;9480:27;9460:18;;;9453:55;9525:18;;50512:55:0;9200:349:1;50512:55:0;-1:-1:-1;;;;;50578:25:0;;;;;;;:18;:25;;;;;;;;:35;;;;;;;;;;;;;:46;;-1:-1:-1;;50578:46:0;;;;;;;;;;50640:41;;540::1;;;50640::0;;513:18:1;50640:41:0;;;;;;;50408:281;;;:::o;43669:270::-;43782:28;43792:4;43798:2;43802:7;43782:9;:28::i;:::-;43829:47;43852:4;43858:2;43862:7;43871:4;43829:22;:47::i;:::-;43821:110;;;;-1:-1:-1;;;43821:110:0;;;;;;;:::i;34911:716::-;34967:13;35018:14;35035:17;35046:5;35035:10;:17::i;:::-;35055:1;35035:21;35018:38;;35071:20;35105:6;35094:18;;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;-1:-1:-1;35094:18:0;-1:-1:-1;35071:41:0;-1:-1:-1;35236:28:0;;;35252:2;35236:28;35293:288;-1:-1:-1;;35325:5:0;-1:-1:-1;;;35462:2:0;35451:14;;35446:30;35325:5;35433:44;35523:2;35514:11;;;-1:-1:-1;35544:21:0;35293:288;35544:21;-1:-1:-1;35602:6:0;34911:716;-1:-1:-1;;;34911:716:0:o;51477:853::-;51631:4;-1:-1:-1;;;;;51652:13:0;;9924:19;:23;51648:675;;51688:71;;-1:-1:-1;;;51688:71:0;;-1:-1:-1;;;;;51688:36:0;;;;;:71;;18604:10;;51739:4;;51745:7;;51754:4;;51688:71;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;-1:-1:-1;51688:71:0;;;;;;;;-1:-1:-1;;51688:71:0;;;;;;;;;;;;:::i;:::-;;;51684:584;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;51929:6;:13;51946:1;51929:18;51925:328;;51972:60;;-1:-1:-1;;;51972:60:0;;;;;;;:::i;51925:328::-;52203:6;52197:13;52188:6;52184:2;52180:15;52173:38;51684:584;-1:-1:-1;;;;;;51810:51:0;-1:-1:-1;;;51810:51:0;;-1:-1:-1;51803:58:0;;51648:675;-1:-1:-1;52307:4:0;51477:853;;;;;;:::o;30294:948::-;30347:7;;-1:-1:-1;;;30425:17:0;;30421:106;;-1:-1:-1;;;30463:17:0;;;-1:-1:-1;30509:2:0;30499:12;30421:106;30554:8;30545:5;:17;30541:106;;30592:8;30583:17;;;-1:-1:-1;30629:2:0;30619:12;30541:106;30674:8;30665:5;:17;30661:106;;30712:8;30703:17;;;-1:-1:-1;30749:2:0;30739:12;30661:106;30794:7;30785:5;:16;30781:103;;30831:7;30822:16;;;-1:-1:-1;30867:1:0;30857:11;30781:103;30911:7;30902:5;:16;30898:103;;30948:7;30939:16;;;-1:-1:-1;30984:1:0;30974:11;30898:103;31028:7;31019:5;:16;31015:103;;31065:7;31056:16;;;-1:-1:-1;31101:1:0;31091:11;31015:103;31145:7;31136:5;:16;31132:68;;31183:1;31173:11;31228:6;30294:948;-1:-1:-1;;30294:948:0:o;14:131:1:-;-1:-1:-1;;;;;;88:32:1;;78:43;;68:71;;135:1;132;125:12;150:245;208:6;261:2;249:9;240:7;236:23;232:32;229:52;;;277:1;274;267:12;229:52;316:9;303:23;335:30;359:5;335:30;:::i;592:250::-;677:1;687:113;701:6;698:1;695:13;687:113;;;777:11;;;771:18;758:11;;;751:39;723:2;716:10;687:113;;;-1:-1:-1;;834:1:1;816:16;;809:27;592:250::o;847:271::-;889:3;927:5;921:12;954:6;949:3;942:19;970:76;1039:6;1032:4;1027:3;1023:14;1016:4;1009:5;1005:16;970:76;:::i;:::-;1100:2;1079:15;-1:-1:-1;;1075:29:1;1066:39;;;;1107:4;1062:50;;847:271;-1:-1:-1;;847:271:1:o;1123:220::-;1272:2;1261:9;1254:21;1235:4;1292:45;1333:2;1322:9;1318:18;1310:6;1292:45;:::i;1348:180::-;1407:6;1460:2;1448:9;1439:7;1435:23;1431:32;1428:52;;;1476:1;1473;1466:12;1428:52;-1:-1:-1;1499:23:1;;1348:180;-1:-1:-1;1348:180:1:o;1741:173::-;1809:20;;-1:-1:-1;;;;;1858:31:1;;1848:42;;1838:70;;1904:1;1901;1894:12;1838:70;1741:173;;;:::o;1919:254::-;1987:6;1995;2048:2;2036:9;2027:7;2023:23;2019:32;2016:52;;;2064:1;2061;2054:12;2016:52;2087:29;2106:9;2087:29;:::i;:::-;2077:39;2163:2;2148:18;;;;2135:32;;-1:-1:-1;;;1919:254:1:o;2178:328::-;2255:6;2263;2271;2324:2;2312:9;2303:7;2299:23;2295:32;2292:52;;;2340:1;2337;2330:12;2292:52;2363:29;2382:9;2363:29;:::i;:::-;2353:39;;2411:38;2445:2;2434:9;2430:18;2411:38;:::i;:::-;2401:48;;2496:2;2485:9;2481:18;2468:32;2458:42;;2178:328;;;;;:::o;2511:186::-;2570:6;2623:2;2611:9;2602:7;2598:23;2594:32;2591:52;;;2639:1;2636;2629:12;2591:52;2662:29;2681:9;2662:29;:::i;2884:347::-;2949:6;2957;3010:2;2998:9;2989:7;2985:23;2981:32;2978:52;;;3026:1;3023;3016:12;2978:52;3049:29;3068:9;3049:29;:::i;:::-;3039:39;;3128:2;3117:9;3113:18;3100:32;3175:5;3168:13;3161:21;3154:5;3151:32;3141:60;;3197:1;3194;3187:12;3141:60;3220:5;3210:15;;;2884:347;;;;;:::o;3236:127::-;3297:10;3292:3;3288:20;3285:1;3278:31;3328:4;3325:1;3318:15;3352:4;3349:1;3342:15;3368:1138;3463:6;3471;3479;3487;3540:3;3528:9;3519:7;3515:23;3511:33;3508:53;;;3557:1;3554;3547:12;3508:53;3580:29;3599:9;3580:29;:::i;:::-;3570:39;;3628:38;3662:2;3651:9;3647:18;3628:38;:::i;:::-;3618:48;;3713:2;3702:9;3698:18;3685:32;3675:42;;3768:2;3757:9;3753:18;3740:32;3791:18;3832:2;3824:6;3821:14;3818:34;;;3848:1;3845;3838:12;3818:34;3886:6;3875:9;3871:22;3861:32;;3931:7;3924:4;3920:2;3916:13;3912:27;3902:55;;3953:1;3950;3943:12;3902:55;3989:2;3976:16;4011:2;4007;4004:10;4001:36;;;4017:18;;:::i;:::-;4092:2;4086:9;4060:2;4146:13;;-1:-1:-1;;4142:22:1;;;4166:2;4138:31;4134:40;4122:53;;;4190:18;;;4210:22;;;4187:46;4184:72;;;4236:18;;:::i;:::-;4276:10;4272:2;4265:22;4311:2;4303:6;4296:18;4351:7;4346:2;4341;4337;4333:11;4329:20;4326:33;4323:53;;;4372:1;4369;4362:12;4323:53;4428:2;4423;4419;4415:11;4410:2;4402:6;4398:15;4385:46;4473:1;4468:2;4463;4455:6;4451:15;4447:24;4440:35;4494:6;4484:16;;;;;;;3368:1138;;;;;;;:::o;4511:260::-;4579:6;4587;4640:2;4628:9;4619:7;4615:23;4611:32;4608:52;;;4656:1;4653;4646:12;4608:52;4679:29;4698:9;4679:29;:::i;:::-;4669:39;;4727:38;4761:2;4750:9;4746:18;4727:38;:::i;:::-;4717:48;;4511:260;;;;;:::o;4776:380::-;4855:1;4851:12;;;;4898;;;4919:61;;4973:4;4965:6;4961:17;4951:27;;4919:61;5026:2;5018:6;5015:14;4995:18;4992:38;4989:161;;5072:10;5067:3;5063:20;5060:1;5053:31;5107:4;5104:1;5097:15;5135:4;5132:1;5125:15;4989:161;;4776:380;;;:::o;5993:409::-;6195:2;6177:21;;;6234:2;6214:18;;;6207:30;6273:34;6268:2;6253:18;;6246:62;-1:-1:-1;;;6339:2:1;6324:18;;6317:43;6392:3;6377:19;;5993:409::o;7170:496::-;7349:3;7387:6;7381:13;7403:66;7462:6;7457:3;7450:4;7442:6;7438:17;7403:66;:::i;:::-;7532:13;;7491:16;;;;7554:70;7532:13;7491:16;7601:4;7589:17;;7554:70;:::i;:::-;7640:20;;7170:496;-1:-1:-1;;;;7170:496:1:o;7671:401::-;7873:2;7855:21;;;7912:2;7892:18;;;7885:30;7951:34;7946:2;7931:18;;7924:62;-1:-1:-1;;;8017:2:1;8002:18;;7995:35;8062:3;8047:19;;7671:401::o;9554:414::-;9756:2;9738:21;;;9795:2;9775:18;;;9768:30;9834:34;9829:2;9814:18;;9807:62;-1:-1:-1;;;9900:2:1;9885:18;;9878:48;9958:3;9943:19;;9554:414::o;10105:489::-;-1:-1:-1;;;;;10374:15:1;;;10356:34;;10426:15;;10421:2;10406:18;;10399:43;10473:2;10458:18;;10451:34;;;10521:3;10516:2;10501:18;;10494:31;;;10299:4;;10542:46;;10568:19;;10560:6;10542:46;:::i;:::-;10534:54;10105:489;-1:-1:-1;;;;;;10105:489:1:o;10599:249::-;10668:6;10721:2;10709:9;10700:7;10696:23;10692:32;10689:52;;;10737:1;10734;10727:12;10689:52;10769:9;10763:16;10788:30;10812:5;10788:30;:::i

ipfs://6f90fa6a11ce9957b015fbf24f03c7cdbc9c4c85786513489ec4149989bb3c21